A. Roshko. On the drag and shedding frequency of two dimensional bluff bodies. NACA Technical Note, NACA TN 3169, 1954.
	A. Roshko. Perspectives on bluff body aerodynamics. J. Wind Eng. Ind. Aerodynamics, 49:79-100, 1993. CrossRef
	S. R. Ahmed, G. Ramn, and G. Faltin. Some salient features of the time averaged ground vehicle wake. SAE Tech. Report. No. 840300, Society of Automotive Engineers, Inc., Warrendale, PA, 1984.
	T. Morel. The effect of base slant on the flow pattern and drag of three-dimensional bodies. In G. Sovran, T. Morel, and W. T. Mason Jr., editors, Aerodynamic Drag Mechanisms of Bluff Bodies and Road Vehicles. Plenum Press, New York - London, 1978.
	H. Choi, J. Lee, and H. Park. Aerodynamics of heavy vehicles. Ann. Rev. Fluid. Mech., 46:441-468, 2014. 17 CrossRef
	H. Choi, W.P. Jeon, and J. Kim. Control of flow over a bluff body. Ann. Rev. Fluid. Mech., 40:113-139, 2008. CrossRef
	M. Pastoor, L. Henning, B. R. Noack, R. King, and G. Tadmor. Feedback shear layer control for bluff body drag reduction. J. Fluid Mech., 608:161-196, 2008.
	V. Parezanovic and O. Cadot. Experimental sensitivity analysis of the global properties of a two-dimensional turbulent wake. J. Fluid Mech., 693:115-149, 2012. CrossRef
	D. J. Parkin, M. C. Thompson, and J. Sheridan. Numerical analysis of bluff body wakes under periodic open-loop control. J. Fluid Mech., 739:94-123, 2014. CrossRef
	B. Khalighi, S. Zhang, C. Koromilas, S. R. Balkanyi, L. P. Bernal, G. Iaccarino, and P. Moin. Experimental and computational study of unsteady wake flow behind a bluff body with a drag reduction device. SAE paper, 2001.
	B. Khalighi, K. H. Chen, and G. Iaccarino. Unsteady aerodynamic flow investigation around a simplified square-back road vehicle with drag reduction devices. J. Fluids Engng., 134 (6):16 pages, 2012.
	R. Littlewood and M. Passmore. The optimization of roof trailing edge geometry of a simple square-back. SAE paper 2010-01-0510, pages 151-160, 2010.
	M. Roumeas, P. Gillieron, and A. Kourta. Analysis and control of the near-wake flow over a square-back geometry. Compt. and Fluids, 38 (1):60-70, 2009.
	E. Wassen, S. Eichinger, and F. Thiele. Simulation of active drag reduction for a square-back vehicle. In R. King, editor, Active Flow Control II, NNFM, pages 241-255. Springer-Verlag, Berlin, 2010.
	M. Grandemange, M. Gohlke, and O. Cadot. Turbulent wake past a three-dimensional blunt body. part 1. global modes and bi-stability. J. Fluid Mech., 722:51-84, 2013. CrossRef
	P. Joseph, X. Amandolese, and J. L. Aider. Drag reduction of the 25 slant angle ahmed reference body using pulsed jets. Exp. Fluids, 52:1169-1185, 2012. CrossRef
	P. Gillieron and A. Kourta. Aerodynamics drag control by pulsed jets on simplified car geometry. Exp. Fluids, 54:16 pages, 2013.
	A. Oxlade and J. F. Morrison. Open-loop control of an axisymmetric turbulent wake using high frequency periodic jet blowing. ETC - 14, Lyon, France., 2013.
	S. Krajnovic and L. Davidson. Numerical study of the flow around a bus-shapped body. J. Fluids Engng., 125:500-509, 2003. CrossRef
	M. Grandemange, A. Mary, M. Gohlke, and O. Cadot. Effect on drag of the flow orientation at the base separation of a simplified blunt road vehicle. Exp. Fluids, 54:10 pages, 2013.
	C. M. Ho and P. Huerre. Perturbed free shear layers. Ann. Rev. Fluid. Mech., 16:365-422, 1984. CrossRef
	M. Grandemange, V. Parezanovic, M. Gohlke, and O. Cadot. On experimental sensitivity analysis of the turbulent wake from an axisymmetric blunt trailing edge. Phys. Fluids, 24, 2012.
	S. Balachandar, R. Mittal, and F. M. Najjar. Properties of the mean recirculation region in the wakes of two-dimensional bluff bodies. J. Fluid Mech., 351:167-199, 1997. CrossRef
	J. H. Gerrard. The mechanics of the formation region of vortices behind bluff bodies. J. Fluid Mech., 25:401-413, 1966. CrossRef
	A. Lahaye, A. Leroy, and A. Kourta. Aerodynamics characterisation of a square back bluff body flow. Int. J. Aerodynamics, 4:43-60, 2014. CrossRef