P. Cavaliere, Isothermal forging of AA 2618 reinforced with 20% of alumina particles, Composites: Part A 35(2004) 619-629. CrossRef
	I.N.A, Oguocha, S. Yanna Copoucas A Calorimetric study of S' and θ' precipitation in Al2O3 particle-reinforced AA 2618, Journal of Materials Science 34 (1999) 3335-3340. CrossRef
	Simon P. Ringer, Kazhuhiro Hono, Toshio Saksai and Ian J. Polmear, Cluster hardening in an aged Al-Cu-Mg alloy, Scripta Matr. Vol. 36, (1997) 517.
	S.P. Ringer, T. Sakurap and I. J. Polmear, Origins of hardening in aged Al-Cu-Mg-(Ag) alloys, ACTA Matr. Vol. 45, (1997), 3731.
	R.N. Wilson and P.G. Partridge, The nucleation and growth of S precipitates in an Al-2.5%, Cu-1.2% and Mg alloy, ACTA Matr. Vol. 13, (1965), 1321.
	M.K Surappa, R.K Rohatgi, Preparation and properties of cast aluminium ceramic particle composites, Journal of Materials Science 16(1981) 983-993. CrossRef
	G.S Hanumantha, G.A Iran, Particle incorporation by melt stirring for the production of metal matrix composites, Journal of Materials Science 28(1993) 2459-2465. CrossRef
	P. Sahin, S. Murphy, The effect of fibre orientation of the dry sliding wear of borosic reinforced 2014 aluminium alloy, Journal of Materials Science, 34(1996) 5399-5407.
	W. Zhou, Z.M. Xu, Studies of SiC reinforced metal matrix composites, Journal of Materials Processing Technology 63(1997) 358-363. CrossRef
	L. Ceschini, G. Minak, A. Morri, Tensile and fatigue properties of AA 6061/20 Vol % Al2O3 and AA 7005/10 Vol % Al2O3p composites, Composites Science and Technology 66 (2006) 333-342. CrossRef
	J. Hashim, L. Looney, M.S.J. Hashmi, Particle distribution in cast metal matrix composites-Part I, Journal of Material Processing Technology 123(2) (2002) 251-257. CrossRef
	T J A Doel, P Bowen, Tensile properties of particulate reinforced metal matrix composites, Composites: Part A 27A (1996) 655-65.
	T.S. Srivatsan, M. Al. Hajri, The fatigue and final fracture behaviour of SiC particles reinforced 7034 aluminium matrix composites. Composites: Part B 33(2002) 391-404. CrossRef
	P.C. Lam, T.S. Srivatsan, Meslet al-Hajri and B. Hotton, Influence of particulate reinforcement on quasi-static and cyclic fracture behaviour of Aluminium alloy based composites. Proceedings of Third Internal Conference on Advances in Composites, AD Comp-2000 (2000) 632-644.
	D F Hasson, S M Hoover, C R Crowe, Effect of thermal treatment on the mechanical and toughness properties of extruded SiCw/aluminium 6061 Metal matrix composites. Journal of Materials Science, 20 (1985) 4147-4154. CrossRef
	C M Friend, Toughness in metal matrix composites, Materials Science and Technology 5(1989)1-7. CrossRef
	V C Nardone, JR Strife, K M Prewo, Microstructurally toughened particulate reinforced aluminium matrix composites. Metall, Trans 22A (1991) 171-182.
	H Ahlatci, E Candan, H Cimenoglu, Effect of Particle size on the mechanical properties of 60 Vol% SiCp reinforced Al Matrix Composites Z. Metall, Trans 93(4) (2002)330-333.
	Sedat Ozden, Recep Ekici, Fehmi Nair, Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites, Composites Part A: Applied Science and Manufacturing 38(2007) 484-494. CrossRef
	F. Bonollo, L Ceschini, G L Goragnani, Mechanical and impact behaviour of (Al2O3)p / 2014 and (Al2O3)p / 6061 Al metal matrix composites in the 25-200°C range. Appl. Composite Materials 4 (1997)173-85.
	M.K Surappa, P Sivakumar, Fracture toughness evaluation of 2024-Al / Al2O3 particulate composites by instrumented impact, Composite Science and Technology 46(1993) 287-92. CrossRef
	T.S. Srivatsan, Meslet Al Hajri, P.C. Lam, The quasi static, cyclic fatigue and final fracture behaviour of a Mg alloy metal matrix composites. Composites- Part B: 36(2006) 209-212. CrossRef